Added to Cart

Shopping Cart

0 item(s) - USD $0.00
Your shopping cart is empty!
☎ +1-888-853-9753 [email protected]

Want to see your order status? Sign In

 |  Shopping Cart

Audi 2.7T Tuning Guide: B5 S4, A6, allroad

The 2.7T is Audi's 2.7 liter biturbo V6, the engine in the B5 S4, the C5 A6 2.7T and the allroad.

It has 30 valves, five per cylinder, and a small turbo on each bank, chosen for response and bolted straight to the exhaust manifold. The APB runs Bosch Motronic ME7.1. Every US 2.7T car is quattro, with a six-speed manual or a five-speed Tiptronic automatic depending on the model.

The short answer, from GTS: we tune the 2.7T in the B5 S4, the C5 A6 and the allroad, engine codes APB and BEL, remotely through the OBD port or by mail-in. For the 2004 A6 2.7T S line, confirm fit with us first. Stage 1 makes 320 hp and 350 lb-ft on a stock car. Stage 2 adds upgraded downpipes for 330 hp and 375 lb-ft. Stage 3 on K04s and Stage 4 on a big or single turbo are custom, built for your turbo.

Which cars have the 2.7T

CarYearsCodeStock
United States
S4 B5 sedan2000-2002APB250 hp / 258 lb-ft
S4 B5 Avant2001-2002APB250 hp / 258 lb-ft
A6 C5 2.7T2000-2002APB250 hp / 258 lb-ft
A6 C5 2.7T2003-2004APB or BEL250 hp / 258 lb-ft
A6 C5 2.7T S line2004BEL265 hp / 280 lb-ft
allroad C5 2.7T2001-2005APB or BEL250 hp / 258 lb-ft
Europe
S4 B51997-2001 / 2000-2001AGB / AZB261 hp / 295 lb-ft
A6 C5 2.7T1999-2001 / 2000-2001AJK / AZA227 hp / 229 lb-ft
A6 C5 2.7T2001-2002 / 2002-2005ARE / BES247 hp / 258 lb-ft
allroad C5 2.7T2000-2002 / 2002-2005ARE / BES247 hp / 258 lb-ft
RS4 B5 Avant2000 / 2000-2001ASJ / AZR375 hp / 325 lb-ft

US years are model years, European years are production years. Audi lists both codes for the 2003-2004 A6. The allroad used APB early, and Audi documents BEL by model year 2003. Check the engine code on your car. Find your engine code. For any other 2.7T code, talk to us first.

Same badge or same car, different engine:

CarEngineGo to
S4 B6 and B7, US, 2004-20094.2 V8, BHF in the US, BBK in EuropeB6 / B7 S4 tune
A4 B5 1.8T1.8T four cylinder1.8T 20v Tuning Guide
A6 C5, other US engines2.8 or 3.0 V6 with no turbo, 4.2 V8Talk to us first
allroad C5, other US engine4.2 V8Talk to us first

Pick your stage

StageTurbosNeedsPower
Stage 1Stock K03, 16 psiNone320 hp / 350 lb-ft
Stage 2Stock K03, 20 psiUpgraded downpipes330 hp / 375 lb-ft
Stage 3Plain jane (PJ) or hybrid K04550cc or bigger injectors, 85mm Hitachi MAF, turbo-back exhaust, front mount intercooler, upgraded diverter valveCustom, built for your turbo
Stage 4Big or single turbo630cc or bigger injectors, S4 3 inch inside diameter MAF housing with the stock sensor, turbo-back exhaust, front mount intercooler, upgraded diverter valveCustom, built for your turbo

On Stage 1 and 2, a turbo-back exhaust, an upgraded diverter valve and an upgraded intercooler are recommended, not required. A rod upgrade is recommended for most Stage 4 setups.

Before you tune

Check these before you add boost:

  • Boost and vacuum leaks: Two turbos, two intercoolers, two diverter valves, a crankcase breather and a lot of hose. Have the intake and boost plumbing pressure tested before you tune.
  • Turbos: Look for oil leaks around both. If one needs replacing, Audi says to replace the pair.
  • Coil packs: Audi ran a service action to inspect and replace ignition coils on many of these cars. Diagnose and fix any misfire before you tune.
  • After-run coolant pump: An electric pump in the V cools the turbos after a hot shutdown. Make sure it works and does not leak.
  • Timing belt: The camshafts run on a belt and chains. With no record of the belt, tensioner and rollers, have them checked.
  • Oil leaks: Check the valve cover gaskets and the top of the engine.

What the tune does

Written for 93 octane / 98 RON, and it adapts to 91 / 95. Lag removed, speed limiter removed, and better mileage when you are not in it. The rev limit goes to 7000 on Stage 1 and 2, and to 7500 on Stage 3 and 4 with the stock head. Every GTS calibration is written for a car with all of its factory emissions equipment in place.

How you get the tune

Both 2.7T tunes can be flashed remotely or by mail-in:

  • Remote: Plug the GTS cable into the OBD port and a Windows laptop, and flash it yourself. The cable is yours to keep.
  • Mail-in: Mail the ECU in and we flash it on the bench. It comes back in two to three days on Stage 1 and 2, and in one to two days on Stage 3 and 4.
  • Logs and revisions: Included. Stage 3 and 4 usually take a revision or two to dial in. Revisions usually come back the same day, and within 72 hours at the outside.
  • Back to stock: Your original calibration is kept, so the car can go back to stock whenever you want it to.

We never ask for remote access to your computer. How remote tuning works.

TAP TO FIND YOUR CAR ▲

Let's go fast!
What's your car?

⌄
⌄
⌄
⌄